 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| THE CONNOR-WINFIELD CORP. 2111 COMPREHENSIVE DRIVE. AURORA, IL 60505. FAX (630) 851-5040. PHONE (630) 851-4722. WWW.CONWIN.COM PRODUCT D AT A SHEET CRYSTAL CONTROLLED OSCILLATORS CW P702 400M 0535 CERAMIC SURFACE MOUNT 3.3V LVPECL 5x7.0mm HIGH FREQUENCY CLOCK OSCILLATOR P702 ABSOLUTE M AXIMUM RATING S PARAMETER Storage Temperature Supply Voltage Input Voltage (Vcc) (Vcc) UNITS MINIMUM -55 -0.5 -0.5 NOMINAL MAXIMUM 125 4.6 Vcc+0.5 UNITS C Vdc Vdc TABLE 2.0 (Fo) MINIMUM 250 -100 0 3.135 NOMINAL 3.3 60 MAXIMUM 800 100 70 3.465 100 8 2 UNITS MHz ppm C Vdc mA pS RMS pS RMS NOTE 1 TABLE 1.0 NOTE DESCRIPTION OPERATING SPECIFIC ATIONS PARAMETER Center Frequency Total Frequency Tolerance Operating Temperature Range Supply Voltage Supply Current Jitter (BW=10Hz to 20MHz) Jitter (BW=12kHz to 20MHz) (Vcc) (Icc) The Connor Winfield P702 is a Fixed Frequency, Surface Mount Crystal Controlled Oscillator (XO) designed for applications requiring low jitter and a 100ppm, 0 to 70C overall stability, LVPECL Differential Outputs and Tri-state Enable / Disable function. The P702 is designed using a 2X or 4X PLL multiplication to achieve the high frequency output. INPUT CHARACTERISTICS PARAMETER Disable Input Voltage (Low) Enable Input Voltage (High) (Vil) (Vih) MINIMUM 2.275 NOMINAL MAXIMUM 1.68 UNITS Vdc Vdc TABLE 3.0 NOTE 2 2 - FEATURES LVPECL OUTPUT CHARACTERISTICS PARAMETER LOAD Voltage (High) (Low) (Voh) (Vol) MINIMUM 2.275 45 NOMINAL 50 MAXIMUM 50 1.68 55 0.5 UNITS Ohms Vdc Vdc % nS TABLE 4.0 NOTE 3 3.3V OPERATION LVPECL DIFFERENTIAL OUTPUTS ENABLE / DISABLE Duty Cycle Rise / Fall Time 20% to 80% 4 LOW JITTER <2pS RMS OVERALL FREQUENCY TOLERANCE 100ppm TEMPERATURE RANGE: 0 to 70C SURFACE MOUNT PACKAGE TAPE AND REEL PACKAGING RoHS COMPLIANT ORDERING INFORMATION PACKAG E CHARACTERISTICS Package TABLE 5.0 Hermetically sealed ceramic package and metal cover. Notes 1) Includes calibration @ 25C, frequency stability vs. temperature, supply and load variations, shock, vibration and 20 years aging. 2) When the oscillator is disabled, the outputs are at High Impedance. Output is enabled with no connection on pad 1. 3) Output must be terminated into 50 ohms to Vcc - 2V or Thevenin equivalent. 4) Duty Cycle measured at 50% of output swing. P702 CLOCK SERIES - 400MHz CENTER FREQUENCY Specifications subject to change without notice. DATA SHEET #: Ec218 PAGE 1 OF 2 REV: 01 DATE: 07/31/06 aCopyright 2001 Connor-Winfield all rights reserved. THE CONNOR-WINFIELD CORP. 2111 COMPREHENSIVE DRIVE. AURORA, IL 60505. FAX (630) 851-5040. PHONE (630) 851-4722. WWW.CONWIN.COM PRODUCT D AT A SHEET CRYSTAL CONTROLLED OSCILLATORS PACKAGE LAYOUT 7 0 MAX SUGGESTED PAD LAYOUT MAX CW P702 400M 0535 .070 MAX (1.8mm) PIN CONNECTIONS Pin 1 2 3 4 5 6 TABLE 6.0 Connection Enable / Disable N/C Ground Q Output Q Output Vcc TABLE 7.0 Output Enable Disable (High Impedance) OUTPUT WAVEFORM Enable / Disable Function (Pad 1) High or Open Low TEST CIRCUIT SOLDER PROFILE Temperature 260C 260C 220C 180C 150C 120C 2 E/D 0 N/C 120 S Max. 10 S 60 S Max. 360 Sec. Max. Time Vcc1 = Vcc2 = 3.3Vdc Specifications subject to change without notice. DATA SHEET #: Ec218 PAGE 2 OF 2 REV: 01 DATE: 07/31/06 aCopyright 2001 Connor-Winfield all rights reserved. |
Price & Availability of P702
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |